MAIN WINDOW IS STILL OPEN BELOW THIS ONE.
[Close This Window]

DIGITAL READOUT SPECIFICATIONS
Wizard Wizard Wizard Wizard Wizard
211 450 450L 900 900E
Number of axes (linear or polar) 1,2,3 1,2,3 2,3 2,3,4 3
Housing die cast die cast die cast die cast die cast
Display technology
Vacuum Flourescent Display (VFD)  
Diagnostics
Basic
Configurable axis designation
Display resolution .0005/.0001     .0002/.0005/001 inch.      001/.002.005/.01/.02 mm
EverTrack TM (req. RBS or RBM encoders)
Support inch-grating encoders
Inch/Metric conversion
Reset
Preset
Absolute/Incremental mode
Radius/Diameter mode
Machine error compensation linear 4-point lin. 4-point lin. 4-point lin. 4-point lin.
Mid-point calculation
Approaching zero warning .5inch/10mm selectable selectable selectable selectable
Add/Subtract calculator
Advanced
Interactive message display     VFD VFD VFD VFD
Help function  
Feed-rate display  
Job clock  
Edge finder input  
Linear/Array bolthole patterns     999   999 999
Frame bolthole patterns     999   999 999
Circular bolthole patterns (full or partial)     360   360 360
Multiple datum points     99   99 99
Tool length offsets     99 99  
Taper calculation    
Axis coupling    
Programmable
Memory     500 500
Skew compensation      
Mirror imaging      
Three Z-axis mode        
First spark zeroing (req. spark sensor & I/O-opt.)        
Spark out        
SparkArrestTM        
Options*
Input/Output (I/O) module  
std.
Constant surface speed (req. I/O-option)    
 
Spindle speed display (for 2 and 3 axis only)    
 
* I/O The Input/Output (I/O) module includes:

•DE15 output connector with Zero output for each axis, approaching zero, 2 relay outputs
 DAC signal for CSS (0-10V/10mA, 12 bit)
•DE9 input connector with zero each axis, recall, store, print, spark detector
•DE9 connector for RS232 serial communication

 

* CSS This option provides a DAC output for open loop control of spindle speed.
* SSD This option will display the spindle speed. Spindle encoder is required.

[Close This Window]
MAIN WINDOW IS STILL OPEN BELOW THIS ONE.